Steampunk STEEL lamp pattern dxf CNC file for PLASMA cutting on flash drive

Description

.dxf format artwork for CNC plasma
cutting
(or high power laser)
Delivered on USB flash drive
(See photo #2 for the layout sample)
Drawn at full scale for maximum detail. Unlike some of our competitors, these files have actually been cut by us and tested then refined for excellent results.
The USB flash drive also contains a detailed parts list and comprehensive assembly instructions. Uses common off-the-shelf parts.
THIS LISTING IS FOR THE DXF FORMAT FILE ON USB flash drive.
No parts are included. Photos of the finished item are for informational purposes only.
Sample item pictured was made from 1/4 inch and 11 ga mild steel.
Yes, the lamp functions mechanically... turn the handle and the gears turn to adjust the position.  Flip the giant lever to turn the lamp off and on (uses a standard wall switch hidden under the steel lever).
For metric units: Scale according to photo #7 above. R
eplace the 1/4 inch steel with 6mm,
replace the 11 gauge steel with 3mm
Material required
1/4 inch: 46 in. x 18 in.,
11 ga: 30 in. x 12 in.
Finished lamp measures
23 inches high when lowered, 33 inches high when fully extended.
We also offer other plans (files) for a very large steel floor lamp similar to this, see our eBay store.
Color and style of the actual flash drive may vary from the photo.
This is all original artwork created by Fred Nelson Fabrication and we
legally
own the content (sometimes called intellectual
property). You are welcome
to make and sell physical items from the digital files however, the f
iles themselves
are not intended for distribution or re-sale and may not be copied, duplicated, or
transmitted in any way.
Buyer agrees not to copy or distribute the electronic files.
Feel free to contact us with questions.
California residents add tax.
Produced by Fred Nelson Fabrication.
All rights reserved.